Download Print this page

GeoVision GV-IPCam Hardware Manual page 91

Hide thumbs Also See for GV-IPCam:

Table of Contents

6.5 Connecting the Camera

1. Use a standard network cable to connect the camera to your network.

2. Connect power using one of the following methods:

• plugging the power adapter to the power port.

• using the Power over Ethernet (PoE) function and the power will be

provided over the network cable.

3. When the ready LED of the camera shines green, the camera is ready

for use.

Note: PoE function is only supported for GV-CA120 and GV-CA220.

Figure 6-5

Table of Contents

Need help?

Do you have a question about the GV-IPCam and is the answer not in the manual?