Loading Factory Default - GeoVision GV-IPCam Hardware Manual

1.6 Loading Factory Default

1. Keep the power and network cables (or PoE) connected to the camera.
2. Press and hold the default button.
Figure 1-22
(GV-MFD120 / 130 / 320)
Figure 1-23
(GV-MFD1501 Series / 2401 Series / 2501 Series / 3401 Series /
5301 Series)
3. Release the default button when the status LED blinks. This shall
take about 8 seconds.
4. When the status LED fades, the process of loading default settings is
completed and the camera reboots automatically.
26
Default button
Status LED
Default button