GeoVision GV-IPCam Hardware Manual page 45

3. Drill the marks and insert the screw anchors.
4. Thread the power and / or network cable(s) through the oval-shaped
hole or the cable opening on the side.
5. Connect the camera to network, power, a microphone or a speaker,
and one input and one output devices. For details, see 2.5
Connecting the Camera.
6. Optionally insert a memory card.
7. Secure the camera to the ceiling or the wall with the supplied screws.
8. Access the live view. For details, see 2.1 Accessing the Live View,
GV-IPCam Firmware Manual.
9. Adjust image clarity using the GV-IP Device Utility program. For
details, see 2.2 Adjusting Image Clarity, GV-IPCam Firmware Manual.
34
Figure 2-4