Ctc Default Settings - Cisco ONS 15600 Reference Manual

Appendix C Network Element Defaults
Table C-6 Time Zones (continued)
Time Zone (GMT +/– Hours)
GMT+12:00
GMT+12:00
GMT+12:00
GMT+12:00
GMT+12:45
GMT+13:00
GMT+13:00
GMT+14:00
C.4 CTC Default Settings
Table C-7
following user-configurable defaults for CTC:
•
•
Note
•
•
•
Table C-7

CTC Default Settings

Default Name
CTC.circuits.CreateLikeTL1
CTC.circuits.RouteAutomatically
CTC.circuits.RouteAutomaticallyDefaultOverridable
CTC.network.LocalDomainCreationAndViewing
CTC.network.Map
78-18400-01
Default Value
(GMT+12:00) Andyra, Kamchatka
(GMT+12:00) Auckland, Wellington
(GMT+12:00) Marshall Islands, Eniwetok
(GMT+12:00) Suva - Fiji
(GMT+12:45) Chatham Island
(GMT+13:00) Nuku'alofa - Tonga
(GMT+13:00) Rawaki, Phoenix Islands
(GMT+14:00) Line Islands, Kiritimati - Kiribati
lists the CTC-level default settings for the Cisco ONS 15600 SDH. Cisco provides the
Automatic Routing—Set circuit creation with the Route Automatically check box selected by
default.
Network Circuit Automatic Routing Overridable—Set by default whether or not a user creating
circuits can change (override) the Automatic Circuit Routing setting (also provisionable as a
default). When this default is set to TRUE it enables users to change whether or not Route
Automatically is selected in the check box. When this default is set to FALSE it ensures that users
cannot change the Route Automatically setting while creating circuits in CTC.
When the Route Automatically check box is not selectable (and is not checked) during circuit
creation, the Using Required Nodes/Spans and Review Route Before Creation check boxes are
also unavailable.
Create TL1-like—Set whether to create only TL1-like circuits; that is, instruct the node to create
only cross-connects, allowing the resulting circuits to be in an upgradable state.
Local domain creation and viewing—Set whether domains that users create and view persist
globally (all CTC sessions), or only locally (within the current CTC session).
Network Map—Set the default network map (which country's map is displayed in CTC network
view).
Default Value Default Domain
FALSE TRUE, FALSE
TRUE TRUE, FALSE
TRUE TRUE, FALSE
FALSE TRUE, FALSE
United States -none-, Germany, Japan, Netherlands, South Korea,
United Kingdom, United States
Cisco ONS 15600 SDH Reference Manual, Release 9.0
C.4 CTC Default Settings
C-39