Asap Card Ether Ports History Window; Asap Card Pos Ports Statistics Parameters - Cisco ONS 15600 Reference Manual

Sdh
Hide thumbs Also See for ONS 15600:
Table of Contents

Advertisement

12.6.2 ASAP Card Ethernet Performance Monitoring Parameters

12.6.2.3 ASAP Card Ether Ports History Window

The Ethernet Ether Ports History window lists past Ethernet statistics for the previous time intervals. The
History window displays the statistics for each port for the number of previous time intervals as shown
in
Table
Table 12-7
Time Interval
1 minute
15 minutes
1 hour
1 day (24 hours)

12.6.2.4 ASAP Card POS Ports Statistics Parameters

The Ethernet POS Ports statistics window lists Ethernet POS parameters at the line level.
Table 12-8
Table 12-8
Parameter
Time Last Cleared
Link Status
gfpStatsRxFrame
gfpStatsTxFrame
gfpStatsRxOctets
gfpStatsTxOctets
gfpStatsRxCRCErrors
gfpStatsRxMBitErrors
gfpStatsRxSBitErrors
gfpStatsRxTypeInvalid
hdlcInOctets
hdlcOutOctets
rxTotalPkts
txTotalPkts
hdlcRxAborts
Cisco ONS 15600 SDH Reference Manual, Release 9.0
12-12
12-7. The listed parameters are defined in
Ethernet History Statistics per Time Interval
Number of Intervals Displayed
60 previous time intervals
32 previous time intervals
24 previous time intervals
7 previous time intervals
defines the ASAP card Ethernet POS Ports parameters.
ASAP Card POS Ports Parameters
Table 12-5 on page
Meaning
A time stamp indicating the last time statistics were reset.
Indicates whether the Ethernet link is receiving a valid Ethernet
signal (carrier) from the attached Ethernet device; up means
present, and down means not present.
Number of received GFP frames.
Number of transmitted GFP frames.
Number of GFP bytes received.
Number of GFP bytes transmitted.
Number of packets received with a payload FCS error.
Sum of all the multiple bit errors. In the GFP CORE HDR at the
GFP-T receiver these are uncorrectable.
Sum of all the single bit errors. In the GFP CORE HDR at the
GFP-T receiver these are correctable.
Number of receive packets dropped due to Client Data Frame UPI
error.
Number of bytes received (from the SONET/SDH path) prior to the
bytes undergoing HLDC decapsulation by the policy engine.
Number of bytes transmitted (to the SONET/SDH path) after the
bytes undergoing HLDC encapsulation by the policy engine.
Number of received packets.
Number of transmitted packets
Number of received packets aborted on input.
Chapter 12 Performance Monitoring
12-8.
78-18400-01

Advertisement

Table of Contents
loading

Table of Contents