Installation Overview - Cisco ONS 15600 Reference Manual

Shelf and Backplane Hardware
This chapter provides a description of Cisco ONS 15600 SDH shelf and backplane hardware. Card and
cable descriptions are provided in
To install equipment, refer to the Cisco ONS 15600 SDH Procedure Guide.
Chapter topics include:
•
•
•
•
•
•
•
•
•
•
•
The Cisco ONS 15600 SDH assembly is intended for use with telecommunications equipment only.
Note
The ONS 15600 SDH is designed to comply with Telcordia GR-1089-CORE Type 2 and Type 4
Note
equipment. Install and operate the ONS 15600 SDH only in environments that do not expose wiring or
cabling to the outside plant. Acceptable applications include Central Office Environments (COEs),
Electronic Equipment Enclosures (EEEs), Controlled Environment Vaults (CEVs), huts, and Customer
Premise Environments (CPEs).

1.1 Installation Overview

The ONS 15600 SDH is a Network Equipment Building System III (NEBS III)-compliant,
environmentally hardened shelf assembly that ships as a single shelf in a bay assembly for Release 9.0.
The ONS 15600 SDH comes with the power distribution unit (PDU), shelf, fans, and backplane already
78-18400-01
1.1 Installation Overview, page 1-1
1.2 Bay Installation, page 1-2
1.3 Front Door, page 1-4
1.4 Rear Covers, page 1-5
1.5 Cable Routing, page 1-7
1.6 Customer Access Panel, page 1-7
1.7 Alarm, Timing, LAN, and Craft Pin Connections, page 1-10
1.8 Power Distribution Unit, page 1-13
1.9 Power and Ground Description, page 1-13
1.10 Fan-Tray Assembly, page 1-14
1.11 Cards and Slots, page 1-17
C H A P T E R
Chapter 2, "Card Reference."
Cisco ONS 15600 SDH Reference Manual, Release 9.0
1
1-1