Ssxc Specifications; Oc48/Stm16 Lr/Lh 16 Port 1550 Specifications; Table A-4 Ssxc Card Specifications; Table A-5 Oc48/Stm16 Lr/Lh 16 Port 1550 Card Specifications - Cisco ONS 15600 Reference Manual

A.2.2 SSXC Specifications
A.2.2 SSXC Specifications
Table A-4
Table A-4
Specification Type
Cross-connect
Operating temperature
Operating humidity
Dimensions
Compliance
A.2.3 OC48/STM16 LR/LH 16 Port 1550 Specifications
Table A-5
Table A-5
Specification Type
Line
Transmitter
Cisco ONS 15600 SDH Reference Manual, Release 9.0
A-6
shows the SSXC card specifications.
SSXC Card Specifications
Description
Connection setup time: 7 microseconds
Latency: 0.5 microseconds
23 to 122 degrees Fahrenheit (–5 to +50 degrees Celsius)
5 to 95 percent, noncondensing
Height: 16.50 in. (419 mm)
Width: 2.36 in. (60 mm)
Depth: 18.31 in. (465 mm)
Card weight: 5.0 lb (2.27 kg)
When installed in a node, ONS 15600 SDH cards comply with these safety
standards: UL 60950, CSA C22.2 No. 950, EN 60950, IEC 60950
shows the OC48/STM16 LR/LH 16 Port 1550 card specifications.
OC48/STM16 LR/LH 16 Port 1550 Card Specifications
Description
Bit rate: 2.49 Gbps
Code: Scrambled nonreturn to zero (NRZ)
Fiber: 1550 nm single-mode
Loopback mode: Facility
Connectors: OGI
Compliance: Telcordia GR-253
Max. transmitter output power: +3 dBm
Min. transmitter output power: –2 dBm
Center wavelength: 1500 nm to 1580 nm
Nominal wavelength: 1550 nm
Transmitter: Distributed feedback (DFB) laser
The CTC Maintenance > Transceiver tab shows the optical power
Note
transmitted (OPT) levels. CTC might show OPT levels at 1 dBm
greater or less than the actual card OPT level.
Appendix A Hardware Specifications
78-18400-01