Oc48/Stm16 Lr/Lh 16 Port 1550 Card-Level Indicators; Oc48/Stm16 Lr/Lh 16 Port 1550 Network-Level Indicators; Oc48/Stm16 Lr/Lh 16 Port 1550 Card Ogi Connector Pinout; Table 2-8 Oc48/Stm16 Lr/Lh 16 Port 1550 Network-Level Indicators - Cisco ONS 15600 Reference Manual

2.4.3 OC48/STM16 LR/LH 16 Port 1550 Card-Level Indicators

2.4.3 OC48/STM16 LR/LH 16 Port 1550 Card-Level Indicators
Table 2-7
Table 2-7
Indicator
STAT LED
SRV LED
LASER ON

2.4.4 OC48/STM16 LR/LH 16 Port 1550 Network-Level Indicators

Table 2-8
card.
Table 2-8
Indicator
SD LED
SF LED

2.4.5 OC48/STM16 LR/LH 16 Port 1550 Card OGI Connector Pinout

Table 2-9
Table 2-9 OC48/STM16 LR/LH 16 Port 1550 Card OGI Connector Pinout
Connector OGI Pin and Card Port
1 1
Transmit 4
2 1
Transmit 8
3 1
Transmit 12 Receive 12
Cisco ONS 15600 SDH Reference Manual, Release 9.0
2-10
describes the functions of the card-level LEDs on the OC48/STM16 LR/LH 16 Port 1550 card.
OC48/STM16 LR/LH 16 Port 1550 Card-Level Indicators
Color Description
Red Indicates a hardware fault; this LED is off during normal operation.
Replace the card if the STAT LED persists. During diagnostics, the LED
flashes quickly during initialization and slowly during configuration
synchronization.
Green The service mode of the card. Green indicates that the card is in use,
amber indicates that the card is out of service, and off indicates that the
card is either booting or has no power applied.
Green The green LASER ON LED indicates that at least one of the card's lasers
is active.
describes the functions of the network-level LEDs on the OC48/STM16 LR/LH 16 Port 1550
OC48/STM16 LR/LH 16 Port 1550 Network-Level Indicators
Color Description
Blue The blue SD LED indicates a signal degrade (SD) or condition such as
a low level signal on one or more of the card's ports.
Red The red SF LED indicates a signal failure (SF) or condition such as loss
of signal (LOS), loss of frame alignment (LOF), or turns on when the
transmit and receive fibers are incorrectly connected. When the fibers
are properly connected, the LED turns off.
lists the OC48/STM16 LR/LH 16 Port 1550 card OGI connector pinouts.
2 3
Receive 4 Transmit 3
2 3
Receive 8 Transmit 7
2 3
Transmit 11 Receive 11
4 5
Receive 3 Transmit 2
4 5
Receive 7 Transmit 6
4 5
Transmit 10 Receive 10
Chapter 2 Card Reference
6 7
Receive 2 Transmit 1
6 7
Receive 6 Transmit 5
6 7
Transmit 9
8
Receive 1
8
Receive 5
8
Receive 9
78-18400-01