Electrical; Power Supply; Operating Modes; European Compliance - GE DigitalFlow XMT868i Startup Manual

4.2 Electrical

The electrical specifications for the Model XMT868i flow transmitter are divided into the following categories.

4.2.1 Power Supply

Options:
Standard: 95 to 240 VAC, 50/60 Hz, ± 10%
Optional: 12 to 28 VDC, ± 5%
Power Consumption:
20 W maximum

4.2.2 Operating Modes

Flow Measurement:
Standard: Correlation Transit-Time™ Mode with clamp-on or wetted transducers
Energy Measurement (optional):
To calculate energy flow rate, use Analog Input Board for transmitters. Use RTD Input Board for direct RTDs.

4.2.3 European Compliance

See the Certification & Safety Statements and the CE Declaration of Conformity at the end of this manual.
DigitalFlow™ XMT868i Startup Guide
Chapter 4. Specifications
61