Panaview Display - GE DigitalFlow XMT868i Startup Manual

Chapter 3. Operation

3.5.3 PanaView Display

Note: See Chapter 2, Initial Setup, in this manual and/or Chapter 1, Programming Site Data, in the Programming
Manual for complete instructions on entering startup data using PanaView.
Power up PanaView, establish communications with the XMT868i and enter the
described in Chapter 2, Initial Setup. Then, proceed as follows:
1. In PanaView, pull down the Output menu (see Figure 18 below) and click on the Text Display option.
Note: The Text Display window that appears after this step is actually stacked on top of any previously opened
windows (such as the Meter Browser window).
2. Using the Window menu, as described in the PanaView Installation Guide, arrange the open windows in the
desired format. For this discussion, Figure 19 below shows the Text Display window in its maximized
(full-screen) size.
3. The left pane of the Text Display window contains the standard PanaView network tree. Expand the XMT
branch, and double-click on the desired channel. On 2-channel units, you can also display the
parameters.
AVG
54
Figure 18: The Output Menu
Figure 19: The Text Display Window
required startup parameters
SUM, DIFF
DigitalFlow™ XMT868i Startup Guide
, as
or