GE DigitalFlow XMT868i Startup Manual page 5

Information Paragraphs
Note: These paragraphs provide information that provides a deeper understanding of the situation, but is not
essential to the proper completion of the instructions.
IMPORTANT:
These paragraphs provide information that emphasizes instructions that are essential to proper
setup of the equipment. Failure to follow these instructions carefully may cause unreliable
performance.
CAUTION!
to the equipment, unless these instructions are followed carefully.
WARNING!
instructions are followed carefully.
Safety Issues
WARNING!
codes, regulations, rules and laws related to safety and safe operating conditions are met for each
installation. The safety of any system incorporating the equipment is the responsibility of the
assembler of the system.
Auxiliary Equipment
Local Safety Standards
The user must make sure that he operates all auxiliary equipment in accordance with local codes, standards,
regulations, or laws applicable to safety.
Working Area
WARNING!
equipment can move suddenly and without warning, do not enter the work cell of this equipment
during automatic operation, and do not enter the work envelope of this equipment during manual
operation. If you do, serious injury can result.
WARNING!
you perform maintenance procedures on the equipment.
DigitalFlow™ XMT868i Startup Guide
This symbol indicates a risk of potential minor personal injury and/or severe damage
This symbol indicates a risk of potential serious personal injury, unless these
It is the responsibility of the user to make sure all local, county, state and national
Auxiliary equipment may have both manual and automatic modes of operation. As
Make sure that power to the auxiliary equipment is turned OFF and locked out before
Preface
iii