GE DigitalFlow XMT868i Startup Manual page 93

GE
Sensing
We,
declare under our sole responsibility that the
DigitalFlow™ XGF868i Ultrasonic Flare Gas Flow Transmitter
DigitalFlow™ XGN868i Ultrasonic Natural Gas Flow Transmitter
DigitalFlow™ IGM878i Ultrasonic Industrial Gas Flow Transmitter
to which this declaration relates, are in conformity with the following standards:
• EN 60079-0: 2012/A11:2013
• EN 60079-1: 2014
• II 2 G Ex d IIC T5; FM12ATEX0059X (FM-NoBo xxxFM Approvals Ltd, Windsor, Berkshire, UK – NoBo 1725)
• EN 61326-1: 2013
• EN 61010-1: 2012, Overvoltage Category II
following the provisions of the 2014/36/EU EMC and 2014/34/EU ATEX directives.
Where products were initially assessed for compliance with the Essential Health and Safety Requirements of the
ATEX Directive 94/9/EC using earlier harmonized standards, a subsequent review has determined that "technical
knowledge" is unaffected by the current harmonized standards listed above.
16 June 2016
Issued
1100 Technology Park Drive
Billerica, MA 01821
DigitalFlow™ XGM868i Ultrasonic Gas Flow Transmitter
DigitalFlow™ XGS868i Ultrasonic Steam Flow Transmitter
DigitalFlow™ XMT868i Ultrasonic Liquid Flow Transmitter
(Baseefa – NoBo xxxBaseefa, Buxton, Derbyshire, UK-NoBo 1180)
GE Sensing
USA
Engineering Manager
GE Measurement Solutions
EU DECLARATION
OF
CONFORMITY
DOC-0003, Rev. D
Mr. Chris Frail
Billerica, MA U.S.A.