Mounting In Normal Environments; Mounting In Environments With Severe Electrical Noise; Electrical Connection - GE DewPro MMY31 Installation And Operation Manual

DewPro MMY31
3.3 Mounting in Normal Environment
•
A standard two-wire, stranded cable can be used to interconnect the
DewPro with the power source
Shielded Two
wire Cable
External Ground

3.4 Mounting in Environments with Severe Electrical Noise

•
In areas where EMI/RFI interference is likely, a shielded signal cable is to
be used for full protection. The DewPro MMY31 meets requirements of IEC
801-1 through 6 (EN 50081-1, 50082-2) when properly shielded cable is
used
Shielded Two
wire Cable
External Ground
Fasten Shield Under
Cable Clamp for
Maximum RFI Protection

3.5 Electrical Connection

GE General Eastern
Installation and Operation Manual
Capped
off
Capped
off
+
24 V DC Nominal (9-32 V)
-
Standard
Fig. 5
EMI/RFI
Fig. 6
Electrical Connec-
tion
Fig. 7
8