Display Setting - Martin Exterior Projection 1000 User Manual – Preliminary

2. Use UP and DOWN to scroll through the fixture's effect controls (Strobe, Dimmer, Cyan, Magenta,
Yellow, Color Selection, Gobo Selection, Gobo Ind /Rot, Animation Index, Animation Rotation,
Frost, Prism, Prism Rotation, Zoom, Focus).
3. Press ENTER to select an effect to adjust.
4. Use UP and DOWN to select a value for the effect, and press ENTER to confirm your selection.
5. Repeat for each effect you want to control.
6. Press MENU to exit.
Any scene that you set in the MANUAL TEST menu is retained in memory when fixture power is cycled
off and on. The MANUAL TEST menu therefore lets you set up a permanent single-scene display
without DMX control.
Resetting effects
To reset an effect, returning it to its default setting:
1. Select RESET FUNCTIONS and press ENTER.
2. Select ALL or one of the effects.
3. Press ENTER to reset.
4. Press MENU to exit.
Returning to factory defaults
To return the fixture to its factory default settings, erasing any settings, standalone scenes, etc. stored
in the fixture's memory:
1. Select FACTORY DEFAULT and press ENTER.
2. Select YES to return to factory defaults or NO to exit.
3. Press ENTER to confirm.
4. Give the fixture time to return to the factory default settings.

Display setting

The DISPLAY SETTING menu provides options to invert, dim, and turn off the control panel display.
Display inverse
For easier reading when the fixture is mounted upside down, flip the display as follows:
1. Select DISPLAY INVERSE and press ENTER.
2. Select YES to invert the display or NO for normal reading.
3. Press ENTER to confirm.
Display auto turn off
The display can be set to stay on or to turn off 1 minute after the last key press. To set display behavior:
1. Select DISPLAY AUTO OFF and press ENTER.
2. Select NO to keep the display illuminated, or YES to have the display turn off automatically after 1
minute.
3. Press ENTER to confirm.
Display intensity
To adjust the brightness of the control panel display:
1. Select INTENSITY and press ENTER.
2. Scroll to a value from 0 to 100%.
3. Press ENTER to confirm.
18 Exterior Projection 1000 User Manual