Printer Driver Installation - Universal Laser Systems X-600 Safety, Installation, Operation, And Basic Maintenance Manual

INSTALLATION
USB to Parallel Printer Cable Adapter
To use this device, you must have one USB port available in your computer or from a USB hub. The
laser system does not have a built-in USB port. However, you can use this adapter to connect the
USB part of the adapter to your computer (or hub) and the parallel port end to the laser system. This
adapter comes complete with installation software. Please follow the manufacturer's instructions on
how to install and use this device.
Ethernet to Parallel Printer Cable Adapter
To use this device, you must have one Ethernet port available in your computer or from an Ethernet
hub. The laser system does not have a built-in Ethernet port. However, you can use this adapter to
connect the Ethernet part of the adapter to your computer (or hub) and the parallel port end to the
laser system. This adapter comes complete with installation software. Please follow the
manufacturer's instructions on how to install and use this device.

Printer Driver Installation

At this point you need to install either the Windows 95/98 or the Windows 2000/XP printer driver.
Included with your laser system in another manual called "Computerized Controls" which describes
the installation and use of the ULS printer driver and also contains information regarding the setup
and proper use of the recommended graphics software and CAD programs. Please read the
"Computerized Controls" manual completely before proceeding to the next section.
Section 2-7