Universal Laser Systems X-600 Safety, Installation, Operation, And Basic Maintenance Manual page 4

System Operating Environment Requirements (user provided)
Operating Environment
Operating Temperature
Storage Temperature
Operating Humidity
Electrical Power
Particulate/Odor Outside
Ventilated Exhaust System
Computer Requirement
Software Requirement
Laser Safety
Laser Source
Work Area
Printer Driver
Hardware Interface
Memory Buffer
Dimensions
System Weight
Laser Cartridge Weight
Available Options
Specifications
Well-ventilated office (recommended) or clean, light-duty manufacturing
73ºF (22ºC) to 77ºF (25º C) for best performance
Single Phase 100/220V AC, 10/5 Amp, 50/60 Hz
Grounded (earthed) and stable (surge and spike protected)
High-pressure vacuum blower capable of
500 CFM (cubic feet per minute) @ 6 inches static pressure
Windows 95/98 or Windows 2000/XP compatible
System Specifications
CO2 Laser, Interlocked Safety Enclosure = Class I
25,30,35,40,45,50,55,or 60 watt CO2 Laser Cartridge
1 or 2 Laser Cartridges can be installed on the X2-660 or the
Windows 95/98 and Windows 2000/XP compatible
RS232C Serial, USB, or Ethernet adapter options available
16 MB standard, single and multiple file storage modes with automatic data
(92.7cm L x 111.8cm W x 100.3cm H)
Rotary Fixture, Air Assist (standard or computer controlled), Air Compressor
(desiccant or refrigerated dryer options), Honeycomb Cutting Table, Dual
Head, Assorted Focal Length Lens Kits
Specifications subject to change without notice
50ºF (10ºC) to 95ºF (35º C) capable
50ºF (10ºC) to 95ºF (35º C)
Non-condensing
(850m3/hr at 1.5kPa)
Graphics or CAD based
(See manual for recommendations)
Red Diode Pointer = Class IIIa
SuperSpeed-660 Platforms
32" x 18" (812.8 x 457.2 mm)
Centronics Parallel (included)
compression
36.5"L x 44"W x 39.5"H
System = 325 lbs. (147 kg)
25/30 Watt = 20 lbs (9 kg)
35/40 Watt = 23 lbs (10 kg)
45/50/55/60 Watt = 26 lbs (12 kg)