Eu Compliance (Ce) - Universal Laser Systems X-600 Safety, Installation, Operation, And Basic Maintenance Manual

EU Compliance (CE)

L A S E R
Product Identification:
Manufacturer:
This equipment Is manufactured in conformity with the following directives:
89/336/EEC
73/23/EEC
89/392/EEC
based on the standards listed.
Standards Used:
Safety:
EMC:
Note: This is not a declaration of conformity. The importer of this equipment
supplies the declaration of conformity.
Warning -
may cause radio interference in which case the user may be required to take
adequate measures.
SAFETY
S Y S T E M S
X-660, X2-660, and SuperSpeed-660
Laser Engraving and Cutting Systems
Universal Laser Systems, Inc.
16008 N. 81
Scottsdale, AZ 85260
Phone: (480) 483-1214 Fax: (480) 483-5620
USA
(EMC Directive)
(Low Voltage Directive)
(Machinery Directive)
EN 60950: 1995
EN 60825: 1994 (Class IIIa)
EN 55022: 1995 (Class A)
EN 50082-1: 1992
EN 60801-2: 1993 (6kV CD, 8kV AD)
EN 61000-3-2: 1996 (class A)
EN 61000-3-3: 1995
EN 61000-4-3: 1997 (3 V/m)
EN 61000-4-4: 1995 (2 kV power line, 0.5 kV signal line)
EN 61000-4-5: 1996 (class 2)
This is a Class A product. In a domestic environment, this product
Section 1-4
I N C.
st
St.