Universal Laser Systems X-600 Safety, Installation, Operation, And Basic Maintenance Manual page 2

This publication and its contents are proprietary to Universal Laser Systems, Inc. (ULS), and are
intended solely for the contractual use of ULS, Inc. customers.
While reasonable efforts have been made to assure the accuracy of this manual, ULS shall not be
liable for errors contained herein or for incidental or consequential damage in connection with the
furnishing, performance, or use of this material.
ULS reserves the right to revise this manual and make changes from time to time without obligation
by ULS to notify any person of such revision or changes.
ULS does not assume any liability arising out of the application or use of any products, circuits, or
software described herein. Neither does it convey a license under its patent rights nor the patent
rights of others.
This publication and its contents may not be reproduced, copied, transmitted, or distributed in any
form, or by any means, radio, electronic, mechanical, photocopying, scanning, facsimile, or otherwise,
or for any other purpose, without the prior written permission of ULS.
ULS provides no warranties whatsoever on any software used in connection with a ULS Laser
Engraving System, express or implied. Neither does it guarantee software compatibility with any off-
the-shelf software package or any software program that has not been written by ULS.
Intended use of this system must be followed within the guidelines of this manual. In no event will
ULS be liable for any damages caused, in whole or in part, by customer, or for any economic loss,
physical injury, lost revenue, lost profits, lost savings or other indirect, incidental, special or
consequential damages incurred by any person, even if ULS has been advised of the possibility of
such damages or claims.
HP is a registered trademark of Hewlett-Packard Corporation.
Windows is a registered trademark of Microsoft Corporation.
Macintosh is a registered trademark of Apple Computer Corporation.
PostScript, Photoshop, and Streamline are registered trademarks of Adobe Systems Inc.
CorelDRAW is a registered trademark of Corel Corporation.
AutoCAD is a registered trademark of AutoDesk Inc.
ULS Platforms are protected under one or more of U.S.
patents 5,661,746; 5,754,575; 5,867,517; 5,881,087;
5,894,493; 5,901,167; 5,982,803; 6,181,719; 6,313,433;
6,342,687. Other U.S. and International patents pending.
Notice
© Universal Laser Systems Inc., 2002
All Rights Reserved