Safety Labels - Universal Laser Systems X-600 Safety, Installation, Operation, And Basic Maintenance Manual

The intense light that appears during the engraving or cutting process is the product of material

combustion or vaporization. DO NOT STARE AT THE BRIGHT LIGHT OR VIEW DIRECTLY
WITH OPTICAL INSTRUMENTS.
 This device may contain a visible Red Dot Pointer (Class IIIa). DO NOT STARE AT THE RED
LIGHT OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.
 The user door(s) are safety interlocked and will disable the CO2 laser beam from firing when the
user door(s) are opened. The Red Dot Pointer is NOT safety interlocked and can be activated
with the door(s) either open or closed.
Do not operate any system that has had its safety features modified, disabled, or removed as this

can expose your eyes and skin to invisible and visible CO2 laser radiation which can cause
permanent blindness and/or severe burns to your skin.

Safety Labels

CDRH and CE regulations require that all laser manufacturers affix warning labels in specific locations
throughout the equipment. The following warning labels are placed on the laser system for your
safety. DO NOT remove them for any reason. If the labels become damaged or have been removed
for any reason, DO NOT OPERATE the laser system and immediately contact Universal Laser
Systems, Inc. for a free replacement. Labels are NOT to scale.
Scottsdale, Arizona
Model No:
Manufactured:
Serial No: Made in USA
221-0004-0
!
WARNING
THIS LASER SYSTEM CONTAINS A
CO LASER IN A CLASS I ENCLOSURE.
2
THE LASER SYSTEM HAS BEEN
CLASSIFIED AS CLASS 3a DUE
TO THE PRESENCE OF A
VISIBLE LASER DIODE.
221-0013-0
DANGER
INVISIBLE AND VISIBLE LASER
RADIATION WHEN OPEN
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION
221-0017-0
SAFETY
SERIAL #: XXXXX
DATE: XXXXX
221-0007-0
THIS EQUIPMENT CONFORMS
TO PROVISIONS OF
US 21 CFR 1040.10
AND 1040.11
221-0015-0
AVOID EXPOSURE
INVISIBLE LASER RADIATION IS
EMITTED FROM THIS APERTURE
221-0018-0
Section 1-2
WARNING
NEVER OPERATE THE LASER SYSTEM
WITHOUT CONSTANT SUPERVISION
EXPOSURE TO THE LASER BEAM MAY
CAUSE IGNITION OF COMBUSTIBLE
MATERIALS WHICH CAN CAUSE SEVERE
DAMAGE TO THE EQUIPMENT
221-0012-0
DANGER
INVISIBLE AND VISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCK FAILED OR
DEFEATED AVOID EYE OR SKIN EXPOSURE
TO DIRECT OR SCATTERED RADIATION
221-0016-0
WARNING
TURN THE LASER SYSTEM OFF BEFORE
CONNECTING OR DISCONNECTING
THE ROTARY FIXTURE
221-0019-0