Software Installation - Ellisys USB Explorer 350 User Manual

2.2

Software Installation

1. Insert the CD-ROM or other media that accompanies the product into the computer's CD-ROM drive. You may
also download the
www.ellisys.com/support/download.php
The Ellisys USB Explorer 350
Examiner applications will vary accordingly).
2. Follow the dialog prompts to install the software application. Note that detailed installation instructions are not
provided here, but are explained in the installation dialogs.
After installing any of the USB Explorer 350 software applications, a New Hardware Wizard may
appear if your USB Explorer 350 unit is connected to a PC. Refer to section
the Control Computer, for more information about installing the USB driver.
16 of 157 | Installing the Applications
applications and run
to request application software.
Setup Wizard screen appears (Analyzer installation is shown below; Exerciser and
the installation from these downloads. Visit
3.6, Connecting to