Ellisys USB Explorer 350 User Manual page 152

22. Examiner Operation
Examiner is operated by setting up for the desired topology (see Section 20, Exerciser or Examiner – Setting Up),
selecting the tests desired, UUT type, specifying the destination output for reports and traces, then initiating the tests
by depressing Run Selected button in the GUI.
Once initiated selected tests are executed automatically, with pass/fail results provided real-time. At the completion
Results
of testing, a summary of test activity is provided in the tab, and access to traces captured and the summary
report is made available.
At the completion of testing, should any failures be detected, Examiner gives the user the option to run only those
tests that failed, by depressing the Run Failures button.
152 of 157 | Examiner Operation