Notification - GeoVision GV-Recording Server User Manual

Table of Contents

Administrator Mode

5.3.6 Notification

You can receive e-mail notification for the following conditions:

• Active connection lost

• USB protection key removed

• Passive connection lost

• Recycling of recorded video

• Start keep days operation

• Motion detection

• Disk full

• Disk error

• Disk Removed

• Recording Failure

To receive e-mail alerts, select the type of condition and select Send E-mail Alerts. For Disk

Full, Disk Error, Disk Removed and Recording Failure, you can set a minimum time interval

in minutes between e-mail alerts. If the mail server has not been set up, click the E-Mail

button to go to the Mail Service page.

Figure 5-24

For details on the Mail Service settings, see 5.4.3 Mail Service.

Note: You can also receive e-mail notification for I/O Trigger alert by enabling E-mail Alarm

in the Recording Setting page (Camera Setting page < Recording Setting tab < E-mail

Alarm). See 5.2.2.B Record Setting.

Table of Contents