Removing The Infrared Burner Ignitor & Thermocouple - KitchenAid KFGR270LSS Technical Education

REMOVING THE INFRARED BURNER IGNITOR
1. Turn off and disconnect the gas supply
going to the grill.
Infrared Burner Ignitor & Thermocouple
2. To remove the infrared burner ignitor:
a) Remove the control panel and the spark
module (see pages 4-2 and 4-3 for the
procedures).
b) Disconnect the infrared burner ignitor
wire from the spark module terminal
and cut the wire tie holding it to the
manifold.
Cut Wire Tie
& THERMOCOUPLE
Infrared Burner Ignitor Wire
c) Remove the screws from the rear panel
and remove the panel.
Screw (1 of 4)
d) Remove the screw from the infrared
burner ignitor & thermocouple cover
and remove the cover.
IR Burner Ignitor & Thermocouple Cover Screw
e) Remove the screw from the infrared
burner ignitor bracket and remove the
ignitor from the unit.
IR Burner Ignitor Screw
4-4
Rear Panel