Download Print this page

KitchenAid KFGR270LSS Technical Education page 23

Hide thumbs

Advertisement

Table of Contents
5.
To replace the gas regulator:
a) Remove the four screws from the rear
panel and remove the panel.
Screw (1 of 4)
b) Disconnect the regulator from the gas
supply.
c) Disconnect the regulator hose from the
brass elbow (if installed) on the grill
manifold.
d) Remove the screw from the hose clamp
and remove the clamp from the hose.
Rear Panel
Regulator Connector
e) For L.P. To Natural Gas Only:
- Remove the brass elbow from the
manifold.
- Connect the natural gas regulator to
the manifold. Use a pipe thread seal-
ant that is certified for use with Natu-
ral gas.
f) For Natural To L.P. Gas Only:
- Mount the brass elbow from the kit to
the manifold. Use a pipe thread seal-
ant that is certified for use with L.P.
gas.
- Connect the L.P. gas regulator to the
brass elbow on the end of the mani-
fold. Use a pipe thread sealant that
is certified for use with L.P. gas.
Brass Elbow
(L.P. Gas Only)
Continued on the next page.
2-11
Manifold
Regulator Hose Clamp W/Screw

Advertisement

Table of Contents
loading

  Related Manuals for KitchenAid KFGR270LSS