KitchenAid KFGR270LSS Technical Education page 39

6. Push the thermocouple out of its holding
clip and position it in the access opening.
Thermocouple Out Of Clip
Access Opening
7. Remove the burner grates and griddle, if
installed.
8. Remove the three screws from the front of
the infrared burner panel, then pull the
front of the panel forward, and remove the
burner panel from the unit.
Infrared Burner Panel
REASSEMBLY NOTE: Turn on the gas to the
grill, and test all of the connections by brushing
on an approved noncorrosive leak-detection
solution. Bubbles will indicate a leak. Correct
any leaks found.
4-7
3 Panel Screws