Setting menu - Setting the unit of
measurement (UNITS SETTING)
This function allows setting the units of
measurement of the displayed values:
Speed/Travelled distance (SPEED)
●
Temperature (TEMP.)
●
Enter the SETTING MENU.
Select "UNITS SETTING" option, by pressing button
(1) and (2).
Once function is highlighted, press button (4).
When entering this function, the instrument panel
shows as first value the speed/travelled distance
"SPEED" (Fig 125).
Each time button (1) or button (2) is pressed the
instrument panel displays, flashing and in sequence,
the "TEMP." setting (Fig 128) and the frame of the
"DEFAULT" indication (Fig 130). Afterwards, the
"SPEED" indication (Fig 125) will start flashing again.
To quit the function press button (2) for 2 seconds.
1
4
2
Fig 124
1
4
2
Fig 125
137