Setting menu - Setting the unit of
measurement (UNITS SETTING)
This function allows setting the units of
measurement of the displayed values:
-
Speed/Travelled distance (SPEED)
-
Temperature (TEMP.)
Enter the SETTING MENU.
Select "UNITS SETTING" option, by pressing button
(1) and (2).
Once function is highlighted, press button (4).
When entering this function, the instrument panel
shows as first value the speed/travelled distance
"SPEED" (Fig 88).
Each time button (1) or button (2) is pressed the
instrument panel displays, flashing and in sequence,
the "TEMP." setting (Fig 91) and the frame of the
"DEFAULT" indication (Fig 93). Afterwards, the
"SPEED" indication (Fig 88) will start flashing again.
To quit the function press button (2) for 2 seconds.
94
1
4
2
Fig 87
1
4
2
Fig 88