Danfoss ECL Comfort 210 Installation Manual page 60

Installation Guide
3.4 Monitoring temperatures and system components
Heating circuit
The overview display in the heating circuit ensures a quick
overview of the actual and (desired) temperatures as well as the
actual state of the system components.
Display example:
49 °C Flow temperature
(31) Desired flow temperature
24 °C Return temperature
(50) Return temperature limitation
DHW circuit
The overview display in the DHW circuit ensures a quick overview
of the actual and (desired) temperatures as well as the actual state
of the system components.
Display example (heat exchanger):
50 °C
Flow temperature
(50) Desired flow temperature
- -
Return temperature: sensor not connected
(30) Return temperature limitation
Input overview
Another option to get a quick overview of measured temperatures
is the 'Input overview' which is visible in the common controller
settings (how to enter the common controller settings, see
'Introduction to common controller settings' . )
As this overview (see display example) only states the measured
actual temperatures, it is read-only.
60 DEN-SMT/DK
ECL Comfort 210 / 310, application A266
Display example with heat exchanger:
VI.KT.X3.02
Danfoss District Energy