Danfoss ECL Comfort 210 Installation Manual page 116

Installation Guide
MENU > Alarm > Fire safety
Alarm value
Circuit
All
An alarm switch can be connected to the alarm input.
When the alarm switch opens or closes, the alarm can be activated.
* See Appendix "Parameter ID overview"
0:
The alarm is activated when the contacts in the alarm
switch close.
1:
The alarm is activated when the contacts in the alarm
switch open.
MENU > Alarm > Fire safety
Alarm time-out
Circuit
All
The alarm is activated when the alarm reason has been present for a longer
time (in seconds) than the set value.
* See Appendix "Parameter ID overview"
Value: Set the alarm time-out
116 DEN-SMT/DK
ECL Comfort 210 / 310, application A266
1x636
Setting range Factory setting
*
1x637
Setting range Factory setting
*
*
*
VI.KT.X3.02
Danfoss District Energy