Wiring A Detector Base - Honeywell SLC Installation Manual

Intelligent Detector Bases and Wireless Gateway

9.3 Wiring a Detector Base

Typical wiring of a detector base (B501 shown) connected to an SLC is shown in the figure below.
An optional RA100Z/RA400Z Remote LED Annunciator is shown connected to the detector.
NOTE: The B210LP base wiring is identical to the B501. B501 is the flangeless model.
60
From Control Panel SLC
+ –
RA100Z /
RA400Z
Remote LED
Annunciator
(Optional)
+ –
Figure 9.1 Wiring a B210LP or B501 Detector Base
–
To Next Device
on SLC
+
FireLite SLC Wiring Manual — P/N 51309:P4 9/17/2014
Wiring a Detector Base