Honeywell SLC Installation Manual page 30

Monitor Modules
MMF-300-10 Monitor Module
This is an addressable monitor module intended to interface between the FACP and up to ten (10)
Style B (Class B) or five (5) Style D (Class A) IDCs containing normally open contact devices.
This type of module is contained in either a BB-2 or BB-6 cabinet. The BB-2 can accommodate up
to 2 modules and the BB-6, which requires the CH-6 chassis, can accommodate up to 6 modules.
See the Installation Instructions provided with module for proper installation into a cabinet.
Disable Address
Place shunt in:
Disable 1 position to disable highest module address
Disable 2 position to disable highest two module addresses
30
Style Y or Style Z Select
Remove shunt for Style Z circuits
Figure 5.2 MMF-300-10 Monitor Module
SLC Address
Set rotary switches to base
(first) address of modules
FireLite SLC Wiring Manual — P/N 51309:P4 9/17/2014
Descriptions