Wiring A Detector Base - Honeywell Fire-Lite Alarms MS-9200 Wiring Manual

Wiring a Detector Base

9.3 Wiring a Detector Base
Typical wiring of a detector base (B501 shown) connected to an SLC is shown in the figure below. An optional RA100Z/RA400Z
Remote LED Annunciator is shown connected to the detector.
NOTE: The B300-6 andd B210LP base wiring is identical to the B501. B501 is the flangeless model.
FireLite SLC Wiring Manual — P/N 51309:R3 7/29/2019
From Control Panel SLC
+ –
RA100Z /
RA400Z
Remote LED
Annunciator
(Optional)
+ –
Figure 9.1 Wiring a B300-6, B210LP, or B501 Detector Base
Intelligent Detector Bases and Wireless Gateway
–
To Next Device
on SLC
+
55