Cut Flatness - ESAB Precision Plasmarc Installation, Operation And Maintenance Manual For Residential Installation

SECTION 4
Drop

4.2.3 Cut Flatness

Drop
Part
Part
Part
Positive Cut Angle
Top dimension is less than the bottom dimension.
Misaligned torch
•
Bent or warped material
•
Worn or damaged consumables
•
High standoff High (arc voltage)
•
Cutting speed fast
•
Current high or low. (See Process Data for
•
recommended current level for specific nozzles).
Top And Bottom Rounded
Condition usually occurs when material is .25" thick
(6,4mm) or less.
High current for given material thickness (See
•
Process Data for proper settings).
4-4
OPERATION