Section 7 Replacement Parts; General; Ordering - ESAB Precision Plasmarc Installation, Operation And Maintenance Manual For Residential Installation

SECTION 7

7.1 General

7.2 Ordering

REPLACEMENT PARTS
Always provide the serial number of the unit on
which the parts will be used. The serial number is
stamped on the unit nameplate.
To ensure proper operation, it is recommended that
only genuine ESAB parts and products be used
with this equipment. The use of non-ESAB parts
may void your warranty.
Replacement parts may be ordered from your
ESAB Distributor or from:
ESAB Welding and Cutting Products
ATTN: Customer Service Department
PO Box 100545 Ebenezer Road
Florence, SC USA 29501-0545
Phone (843) 664-4405
(800) ESAB-123 (372-3123)
ESAB Cutting Systems - Canada
6010 Tomken Road
Mississauga, Ontario, Canada L5T 1X9
Phone (905) 670-0220
Fax (905) 670-4879
ESAB_HANCOCK GmbH
Cutting Technologies
P.O. Box 1128
D-61174 Karbon
Robert-Bosch-Strasse 20
D-61184 Karbon
Phone + 49 60 39 40-0
Fax +49 60 39 40 301+302
http://www.esab.de
Be sure to indicate any special shipping instructions
when ordering replacement parts.
Refer to the Communications Guide located on the
last page of this manual for a list of customer
service phone numbers.
7-1