Sec; Introduction; Description; Standard Features - Omega CN1001-TC User Manual

1.1 DESCRIPTION

The Programmable Thermocouple/Temperature Meter with Time Proportional is a value packed
indicator/ controller. Four full digits allow for an accurate display of your temperature. Your meter
may be a basic indicator or it may include analog output or dual relay output. Analog output is
fully scalable and may be configured as a proportional controller, or to follow your display. Dual
5 amp, form C relays control critical processes. Front panel peak detection and memory is also
standard. A mechanical lockout has been included to guard against unauthorized changes.

1.2 STANDARD FEATURES

The following is a list of features:
* 4-digit red 14 segment LED display
* NEMA 4/Type 4 Front Bezel
* ±0.5 °C accuracy
* J, K, DIN J or T thermocouple types
* Peak detection and memory
* Non-volatile memory-no battery backup
* 115 or 230 V ac 50/60 Hz power supply

1.3 OPTIONAL FEATURES

* Dual 5 amp, form C relay outputs
* Scalable analog output
* Proportional control
* Front-panel deviation correction
* Easy setup for proportional control
Information that is especially important to note is identified by three labels:
• NOTE
• WARNING
• CAUTION
• IMPORTANT
NOTE: provides you with information that is important to successfully setup and use the
Programmable Digital Meter.
CAUTION or WARNING: tells you about the risk of electric shock.
CAUTION, WARNING or IMPORTANT: tells you of circumstances or practices that can
effect the meter's functionality and must refer to accompanying documents.
SECTION 1. INTRODUCTION
SECTION 2. NOTES, WARNINGS and CAUTIONS
1