Set The Parameters Of Geo-Fence Information - Queclink GL200 User Manual

GL200 Manage Tool User Guide
Step_5: Click the "Send" button; download the parameters of GTFRI to GL200.

3.2.12 Set the parameters of Geo-Fence Information

Step_1
Step_2
Step_1: Select "Geo-Fence Configuration", after that the parameters of GTGEO show in
Step_2: The command message which shall be sent to GL200 will be generated based on input
Step_3: It is recommended to read the parameters from GL200 and edit based on them
Step_4: Set the Geo-Fence parameters. Please refer to "GL200 @Track Air Interface Protocol" for
Step_5: Click the "Send" button; download the parameters of GTGEO to GL200.
TRACGL200MT002
Command Operation Space.
and displayed here. Please note this command message can also be sent to GL200
through SMS or GPRS.
the meaning of each parameter.
Step_4
Step_3
Step_5
- 30 -