Set The Parameters Of White Call List Configuration; Tracgl200Mt002 - Queclink GL200 User Manual

GL200 Manage Tool User Guide
Step_1: Select "transparent data transmission", after that the parameters of GTDAT show in
Step_2: The command message which shall be sent to GL200 will be generated based on input
Step_3: Set the Transparent Data Transmission parameters. Please refer to "GL200 @Track Air
Step_4: Click the "Send" button; download the parameters of GTDAT to GL200.

3.2.18 Set the parameters of White Call List Configuration

Step_1
Step_2
Step_1: Select "White Call List Configuration", after that the parameters of GTWLT show in
Command Operation Space.
Step_2: The command message which shall be sent to GL200 will be generated based on input
and displayed here. Please note this command message can also be sent to GL200 through
SMS or GPRS.
Step_3: It is recommended to read the parameters from GL200 and edit based on them.
Step_4: Set the White Call List parameters. Please refer to "GL200 @Track Air Interface
Protocol" for the meaning of each parameter.
Step_5: Click the "Send" button; download the parameters of GTWLT to GL200.

TRACGL200MT002

Command Operation Space.
and displayed here. Please note this command message can also be sent to GL200
through SMS or GPRS.
Interface Protocol" for the meaning of each parameter.
Step_4
Step_3
Step_5
- 34 -