Related Manuals for Queclink GL200
Summary of Contents for Queclink GL200
- Page 1 GL200 GSM/GPRS/GPS Tracker Manage Tool User Guide TRACGL200MT002 Revision: 2.03 http://www.queclink.com sales@queclink.com...
- Page 2 TRACGL200MT002 General Notes Queclink offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Queclink. The information provided is based upon requirements specifically provided to Queclink by the customers. Queclink has not undertaken any independent search for additional relevant information, including any information that may be in the customer’s possession.
-
Page 3: Table Of Contents
GL200 Manage Tool User Guide Contents Contents ............................2 1. Revision history ..........................4 2. GL200 Manage Tool Interface ...................... 5 2.1. System Requirements ......................5 2.2. COM Setting ........................6 2.3. Quick Setting Wizard ......................6 2.4. Professional Setting Windows ..................... 7 2.4.1 Title Bar ........................ - Page 4 GL200 Manage Tool User Guide 3.2.19 Set the parameters of Google link SMS configuration ........... 35 3.2.20 Set the parameters of Network Select ..............36 3.2.21 Set the parameters of Store Command String ............37 3.2.22 Set the parameters of User Defined Function ............38 3.2.23 Set the parameters of Safe Flight Manager .............
-
Page 5: Revision History
GL200 Manage Tool User Guide 1. Revision history Revision Date Author Description of change 2.00 2011-7-20 Marry ma Instruction of the Manage Tool V3.0 which apply to software version GL200R00A09V05M32_SST and GL200R00A09V06M128_NMX 2.01 2011-08-16 Marry ma Add chapter 2.1 to define system requirements. -
Page 6: Gl200 Manage Tool Interface
(These messages can also be sent by SMS or GPRS ). The administrators can also use the manage tool to configure GL200 before selling. But it is strongly recommended to establish a backend server and implement the way to control GL200 by SMS or GPRS. -
Page 7: Com Setting
GL200 Manage Tool User Guide 2.2. COM Setting Select the COM port, input the password “gl200”, and the main window will display. 2.3. Quick Setting Wizard The quick setting wizard gives a basic setting for device. If you want use more functions of GL200, please change to enter professional setting mode. -
Page 8: Professional Setting Windows
GL200 Manage Tool User Guide 2.4. Professional Setting Windows Menus Toolbar Command Browser Command Operation Space Title Bar Status Bar 2.4.1 Title Bar Title Bar indicates current operational command title. 2.4.2 Menus It include “Start”, “Tool”, “Help” menu in menus. - Page 9 GL200 Manage Tool User Guide [Quick Setting Wizard]: It is used to open quick setting wizard directly. Please refer to chapter 3.1 for details. [Operation Log]: It is used to display/hidden the operation log. Operation [Options]: It is used to set the basic setting of manage tool.
- Page 10 GL200 Manage Tool User Guide “Advanced Options” include COM settings and other settings. COM Settings is used to set enable/disable slowclock control. It is recommended using default setting for these settings. 2.4.2.3 Help Menu Help menu include “About” and “Diagnosis”.
-
Page 11: Toolbar
GL200 Manage Tool User Guide “Support Version” indicates the firmware which this manage tool used for. “Unit Version” indicates the firmware which connects to the PC. It is recommended using the same version of support version. If it is different between support version and device version, the new character of device can not be used in this tool. -
Page 12: Status Bar
GL200 Manage Tool User Guide “Read From Device”: It is used to read all configuration from device which connects to PC. “Load Configuration From File”: It is used to load configuration file to the manage tool. [Send All Configuration]: It is used to execute all configurations in Command Operation Space except GTRTO. - Page 13 GL200 Manage Tool User Guide Time Adjustment GTTMA Non Movement Detection GTNMD Function Key Setting GTFKS Outside Working Hours GTOWH Position Related Report Fixed Position Report GTFRI Geo-Fence Configuration GTGEO Alarm Setting Speed Alarm GTSPD Digital Output Port Settings GTOUT...
-
Page 14: Operation Result Interface
GL200 Manage Tool User Guide [Command Display]: Command with parameters in parameters area display in this area. [Read]: Click this button to read this command from device. [Send]: Click this button to send this command to device. 2.5. Operation Result Interface 2.5.1 Operation Successfully Interface... - Page 15 GL200 Manage Tool User Guide Please change to correct device password if Password Error. There are some issues with this com, please check your com wire or port. TRACGL200MT002 - 14 -...
-
Page 16: Operation Instruction
3. Operation Instruction 3.1. Device Configuration with Quick Setting Wizard The manage tool is developed based on the @Track Air Interface Protocol. Please refer to “GL200 @Track Air Interface Protocol” for detail. The quick setting wizard gives a basic setting for device. If you want use more functions of GL200, please change to professional setting mode. -
Page 17: Main Server Setting
Step_1: Set report mode, main server, main server port, and SMS gateway in this window. The meaning of these parameters, please refer to the “GL200 @Track Air Interface Protocol” for detail. Step_2: Click “Check if main backend server is available” to check if main server IP and port is valid in network. -
Page 18: Fixed Time Report Setting
Step_3 3.1.4 Fixed Time Report Setting Step_1: Set check interval, send interval, discard no fix in this window. The meaning of these parameters, please refer to the “GL200 @Track Air Interface Protocol” for detail. Step_2: Click “Next”. TRACGL200MT002 - 17 -... -
Page 19: Send Command To Device
GL200 Manage Tool User Guide Step_1 Step_2 3.1.5 Send Command to Device Step_1: Click “Send Command”. Command GTBSI, GTSRI, and GTFRI will send to device. Step_2: If the settings download successfully, the result return OK. Click “OK” to exit the quick setting wizard. - Page 20 GL200 Manage Tool User Guide Step_1 Step_2 TRACGL200MT002 - 19 -...
-
Page 21: Device Configuration In Professional Setting Mode
GL200 Manage Tool User Guide 3.2. Device Configuration in Professional Setting Mode The manage tool is developed based on the @Track Air Interface Protocol. Please refer to “GL200 @Track Air Interface Protocol” for detail. Following is a general procedure to configure GL200 with manage tool. -
Page 22: Set The Parameters Of Backend Server Register Information
Step_1: Select “Backend Server Register Information”, after that the parameters of GTSRI show in Command Operation Space. Step_2: The command message which shall be sent to GL200 will be generated based on input and displayed here. Please note this command message can also be sent to GL200 through SMS or GPRS. -
Page 23: Set The Parameters Of Quick Start Setting
Step_1: Select “Quick Start Settings”, after that the parameters of GTQSS show in Command Operation Space. Step_2: The command message which shall be sent to GL200 will be generated based on input and displayed here. Please note this command message can also be sent to GL200 through SMS or GPRS. -
Page 24: Set The Parameters Of Global Configuration
Step_1: Select “Global Configuration”, after that the parameters of GTCFG show in Command Operation Space. Step_2: The command message which shall be sent to GL200 will be generated based on input and displayed here. Please note this command message can also be sent to GL200 through SMS or GPRS. -
Page 25: Set The Parameters Of Auto-Unlock Pin
Step_1: Select “Auto-Unlock-PIN”, after that the parameters of GTPIN show in Command Operation Space. Step_2: The command message which shall be sent to GL200 will be generated based on input and displayed here. Please note this command message can also be sent to GL200 through SMS or GPRS. -
Page 26: Set The Parameters Of Time Adjustment
GL200 Manage Tool User Guide Command Operation Space. Step_2: The command message which shall be sent to GL200 will be generated based on input and displayed here. Please note this command message can also be sent to GL200 through SMS or GPRS. -
Page 27: Set The Parameters Of Non Movement Detection
Step_1: Select “Non Movement Detection”, after that the parameters of GTNMD show in Command Operation Space. Step_2: The command message which shall be sent to GL200 will be generated based on input and displayed here. Please note this command message can also be sent to GL200 through SMS or GPRS. -
Page 28: Set The Parameters Of Function Key Setting
Step_1: Select “Function Key Setting”, after that the parameters of GTFKS show in Command Operation Space. Step_2: The command message which shall be sent to GL200 will be generated based on input and displayed here. Please note this command message can also be sent to GL200 through SMS or GPRS. -
Page 29: Set The Parameters Of Outside Working Hours
Step_1: Select “Outside Working Hours”, after that the parameters of GTOWH show in Command Operation Space. Step_2: The command message which shall be sent to GL200 will be generated based on input and displayed here. Please note this command message can also be sent to GL200 through SMS or GPRS. -
Page 30: Set The Parameters Of Fixed Report Information
Step_1: Select “Fixed Position Report”, after that the parameters of GTFRI show in Command Operation Space. Step_2: The command message which shall be sent to GL200 will be generated based on input and displayed here. Please note this command message can also be sent to GL200 through SMS or GPRS. -
Page 31: Set The Parameters Of Geo-Fence Information
Step_1: Select “Geo-Fence Configuration”, after that the parameters of GTGEO show in Command Operation Space. Step_2: The command message which shall be sent to GL200 will be generated based on input and displayed here. Please note this command message can also be sent to GL200 through SMS or GPRS. -
Page 32: Set The Parameters Of Speed Alarm
Step_1: Select “Speed Alarm”, after that the parameters of GTSPD show in Command Operation Space. Step_2: The command message which shall be sent to GL200 will be generated based on input and displayed here. Please note this command message can also be sent to GL200 through SMS or GPRS. -
Page 33: Set The Parameters Of Digital Input Port Setting
GL200 Manage Tool User Guide Step_2: The command message which shall be sent to GL200 will be generated based on input and displayed here. Please note this command message can also be sent to GL200 through SMS or GPRS. Step_3: Set the Digital Output parameters. Please refer to “GL200 @Track Air Interface Protocol”... -
Page 34: Set The Parameters Of Real Time Operation
Step_1: Select “Real Time Operation”, after that the parameters of GTRTO show in Command Operation Space. Step_2: The command message which shall be sent to GL200 will be generated based on input and displayed here. Please note this command message can also be sent to GL200 through SMS or GPRS. -
Page 35: Set The Parameters Of White Call List Configuration
Step_1: Select “transparent data transmission”, after that the parameters of GTDAT show in Command Operation Space. Step_2: The command message which shall be sent to GL200 will be generated based on input and displayed here. Please note this command message can also be sent to GL200 through SMS or GPRS. -
Page 36: Gl200 Manage Tool User Guide
Step_1: Select “Google Link SMS Configuration”, after that the parameters of GTGLM show in Command Operation Space. Step_2: The command message which shall be sent to GL200 will be generated based on input and displayed here. Please note this command message can also be sent to GL200 through SMS or GPRS. -
Page 37: Set The Parameters Of Network Select
Step_1: Select “Network Select”, after that the parameters of GTNTS show in Command Operation Space. Step_2: The command message which shall be sent to GL200 will be generated based on input and displayed here. Please note this command message can also be sent to GL200 through SMS or GPRS. -
Page 38: Set The Parameters Of Store Command String
Step_1: Select “Store Command String”, after that the parameters of GTCMD show in Command Operation Space. Step_2: The command message which shall be sent to GL200 will be generated based on input and displayed here. Please note this command message can also be sent to GL200 through SMS or GPRS. -
Page 39: Set The Parameters Of User Defined Function
Step_1: Select “Store Command String”, after that the parameters of GTUDF show in Command Operation Space. Step_2: The command message which shall be sent to GL200 will be generated based on input and displayed here. Please note this command message can also be sent to GL200 through SMS or GPRS. -
Page 40: Set The Parameters Of Safe Flight Manager
Step_1: Select “Store Command String”, after that the parameters of GTSFM show in Command Operation Space. Step_2: The command message which shall be sent to GL200 will be generated based on input and displayed here. Please note this command message can also be sent to GL200 through SMS or GPRS. -
Page 41: Read/Save All Configuration
GL200 Manage Tool User Guide 3.3. Read/Save All Configuration Step_1: It is recommended to read all configurations from device before save the configuration. Select “Read All Configuration””Read From Device”. Step_2: After read successfully, click “Save All Configuration” in toolbar. Step_3: Select a folder, and key in the name of configuration file, then click “Save” button. -
Page 42: Load/Execute All Configuration
GL200 Manage Tool User Guide 3.4. Load/Execute All Configuration Step_1: Before execute all configurations, please load the configuration file or set all parameters in commands. To load configuration file, please select “Read All Configuration” ” Load Configurations From File”. And then select the configuration file you needed.