Set The Parameters Of Geo-Fence Information - Queclink GL300 User Manual

GL300 Manage Tool User Guide
Step_5: Click the "Send" button; download the parameters of GTFRI to GL300.

3.2.12 Set the parameters of Geo-Fence Information

Step_1
Step_2
Step_1: Select "Geo-Fence Configuration", after that the parameters of GTGEO show in
Step_2: The command message which shall be sent to GL300 will be generated based on input
Step_3: It is recommended to read the parameters from GL300 and edit based on them
Step_4: Set the Geo-Fence parameters. Please refer to "GL300 @Track Air Interface Protocol" for
the meaning of each parameter.
Step_5: Click the "Send" button; download the parameters of GTGEO to GL300.
TRACGL300MT001
Command Operation Space.
and displayed here. Please note this command message can also be sent to GL300
through SMS or GPRS.
Step_4
Step_3
Step_5
- 30 -