Set The Parameters Of Speed Alarm; Set The Parameters Of Digital Output Port Settings - Queclink GL200 User Manual

GL200 Manage Tool User Guide

3.2.13 Set the parameters of Speed Alarm

Step_1
Step_2
Step_1: Select "Speed Alarm", after that the parameters of GTSPD show in Command Operation
Step_2: The command message which shall be sent to GL200 will be generated based on input
Step_3: It is recommended to read the parameters from GL200 and edit based on them
Step_4: Set the Speed Alarm parameters. Please refer to "GL200 @Track Air Interface Protocol"
for the meaning of each parameter.
Step_5: Click the "Send" button; download the parameters of GTSPD to GL200.

3.2.14 Set the parameters of Digital Output Port Settings

Step_1
Step_2
Step_1: Select "Digital Output Port Setting", after that the parameters of GTOUT show in
Command Operation Space.
TRACGL200MT002
Space.
and displayed here. Please note this command message can also be sent to GL200
through SMS or GPRS.
Step_4
Step_3
Step_5
Step_3
Step_4
- 31 -