Gl200 Manage Tool Interface; System Requirements - Queclink GL200 User Manual

GL200 Manage Tool User Guide

2. GL200 Manage Tool Interface

GL200 manage tool is PC software which can be used to configure GL200 through
Data_Cable_M. It is easy for the backend server developers to configure GL200 with manage tool,
which has friendly user interface. The correct command messages sent to GL200 will be displayed
on the manage tool. (These messages can also be sent by SMS or GPRS ).
The administrators can also use the manage tool to configure GL200 before selling. But it is
strongly recommended to establish a backend server and implement the way to control GL200 by
SMS or GPRS. Please refer to "GL200 @Track Air Interface Protocol" for detail.
Before using the manage tools please find "PL2303_Prolific_DriverInstaller_v1417.zip" in
develop suit and install the driver for PL2303. After that a new COM port can be found in the PC
system, and then please follow the steps as below:
1. Power on GL200.
2. Connect GL200 to PC with Data_Cable_M.
3. Run "Queclink GL200 Manage Tool Vx.xx.exe".

2.1. System Requirements

In order for this manager tool to run on your computer, you must use it in below operating system:
♦
Windows 98SE;
♦
Windows ME Windows 2000 SP4;
♦
Windows XP SP2 and above (32 & 64 bit);
♦
Windows Server 2003 (32 & 64 bit);
♦
Windows Server 2008 (32 & 64 bit);
♦
Windows Vista (32 & 64 bit);
♦
Windows 7 (32 & 64 bit);
Supported System Environments:
♦
Microsoft .NET Framework 2.0 or higher
TRACGL200MT002 - 5 -