Chapter 3 Interpreting Test Results
About G.SHDSL results
About G.SHDSL results
46
After the HST-3000 has synchronized with the remote end,
the unit will immediately display results on the LCD. You can
view many additional results by pressing the Display soft key
and selecting other results screens.
NOTE:
The available results depend on the modem type and test
configuration. Your unit may not show all of the results listed
in the following sections.
The following result categories are available in G.SDHSL
Modem Emulate and Through mode:
– Summary
– Errors
– Event log
– Data
– IP
– Ethernet (through mode only)
– Ping
– Trace Route
– ATM General
– ATM OAM
– ATM Channel
– FTP/HTTP (through mode only)
– Performance
– Signal
– Loop status
– Identity
– CO req. configs
– EOC
HST-3000 G.SHDSL Testing User's Guide