Setting General Modem Parameters - JDS Uniphase HST-3000 User Manual

Chapter 2 G.SHDSL Testing
Testing in G.SHDSL STU-R TE mode
Setting general
modem
parameters
10
The following procedure describes how to set the general
modem parameters.
To set the general modem parameters
1 Press the Configure navigation key.
The parameter soft keys appear.
2 Press the GENERAL soft key.
The General Settings menu appears.
3 Select Phys. Standard, and then change the settings as
appropriate for the physical standard in use.
This is the physical standard to which the modem will
operate:
– G.991.2 (Annex A)
– G.991.2 (Annex B)
– G.991.2 (Annex B ANFP)
– G.991.2.bis Auto PAM Anx. A/F
– G.991.2.bis TCPAM-32 Anx. A/F
– G.991.2.bis Auto PAM Anx. B/G
– G.991.2.bis TCPAM-32 Anx. B/G
– G.991.2 (Annex A) 4-wire
– G.991.2 (Annex B) 4-wire
– G.991.2 (Annex B ANFP) 4-wire
HST-3000 G.SHDSL Testing User's Guide