Install The New Driver And Driver Software - Allen-Bradley 1784-PCID Installation Instructions Manual

2-2 Install the Driver in Windows NT
5. Select Yes to uninstall the Driver.
If you are prompted to remove unused shared files, select No
TIP
to All.
6. Reboot the computer.

Install the New Driver and Driver Software

We recommend that you exit all Windows programs before
IMPORTANT
running this Setup program.
1. Choose the location from which you wish to install the Driver and Driver
Software.
if
you are installing from a floppy disk
you are installing from a compressed file
2. Select Start ⇒Run.
3. At the Run pop-up menu, type x:\setup where x is the drive where the
installation files are stored.
4. Click OK and follow the on-screen instructions for installing the 1784-PCID
Driver and Driver Software.
Publication 1784-IN004D-EN-P - August 2002
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
then
Insert the floppy disk into the computer's
floppy disk drive.
download from
http://support.rockwellautomation.com and
unzip the files into a temporary directory