Installation Precautions - Panasonic CZ-RTC6BL Installation Instructions Manual

Wired remote controller
Table of Contents

Advertisement

Installation Precautions

Installation location
50 mm
1 to
1.5 m
Floor
Remote control wiring
Wiring diagram
Indoor unit
R1
R2
RC wiring (fi eld supply)
• No polarity
Terminals for RC wiring
Attention
 Use the fi eld supplied RC wiring with at least 1 mm in thickness of insulation part including the
sheath.
Wiring Regulations may diff er depending on location. For fi eld wiring rules, please refer to your
LOCAL ELECTRICAL CODES.
You must ensure that installation complies with relevant rules and regulations.
 Be careful not to connect cables to other terminals of indoor units (e.g. power source wiring
terminal). Malfunction may occur.
 Do not bundle together with the power source wiring or store in the same metal tube. Operation
error may occur.
 If noise is induced to the unit power supply, attach a noise fi lter.
 Install at the height of 1 to 1.5 m from the fl oor
50 mm
 Keep a space around the remote controller as detailed
 Avoid the following locations for installation.
50 mm
• In the shadow or backside of objects deviated from the
• Location where condensation occurs
• Location near heat source
50 mm
 Keep distance of 1 m or more from the TV, radio and PC.
 Do not use in special environments.
(Location where average room temperature can be detected).
on the fi gure shown left.
room airfl ow
(The remote controller is not moisture proof or drip proof)
(Image blur or related noise may occur)
Use in places with much oil (including machine oil),
steam, fl ammable or corrosive gas, voltage fl uctuation,
surrounding the metal body, may lead to severe
decrease in functionality and damage to parts.
 Type of wiring
 Use cables of 0.75 to 1.25 mm
RC
 Total wire length: 500 m or less
( The wire length between indoor units
1
should be 200 m or less.)
2
 Number of connectable units
 Remote controller:
1 unit connection only
When connecting the remote controller to indoor
units released in April 2020 and after
(PACi NX series and subsequent series),
2 remote controllers can be connected.
* 2 × CZ-RTC6BL (CZ-RTC6WBL) cannot be connected
 Indoor unit
.
2
: Max. 8
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cz-rtc6wbl

Table of Contents