Setting Procedure
3.4.3 Registering Tag Name/Instance ID
Register the Tag Name/Instance ID specified from originator. The following procedure is
explained on the assumption that the EtherNet/IP setting screen has been activated.
PROCEDURE
1. Select the target I/O map from Scan List.
"I/O Map Setting" screen appears.
2. Select Communication Method (Tag or Instance).
In this example, "Communication Method = Tag".
3. Input Tag Name/Instance ID.
In this example, "Tag Name = Tag_Test1".
4. Input "Data Size" of transmission data.
In this example, "Data Size = 10 words".
KEY POINTS
Register Tag/Instance for each connected originator.
•
When connected from more the one originators, the connections are
•
distinguished by each instance ID/tag name.
3-18