Operator's Manual; Daily Checks Before Start-Up - Nilfisk-Advance City Ranger 2250 Operator's Manual

Operator's manual

2.1 Daily checks before start-up

Open left rear screen
1. Press the screen release button. (Picture 1)
2. Open the screen all the way or remove the screen.
Special attention must be given to the following
checks
Engine oil
Remove dipstick. (Picture 2)
The oil level must be between the two lines on the
dipstick. (Picture 3)
Hydraulic oil
When the machine is switched on, the hydraulic oil lamp
must not light, see section 9, page 14. If the lamp lights,
the hydraulic oil level is too low, topp up with hydraulic oil.
The hydraulic oil level can also be checked visually on the
sight glass of the hydraulic tank (picture 4). Must be visible
in the sight glass. (Picture 4)
Topping-up – see maintenance section 3.4.
34
1
Release button
2
Engine oil – dipstick
3
Min.
4
Hydraulic oil – sight glass
Operator's Manual City Ranger 2250
Max.