Cab Heating; Cab Ventilation; Air Conditioning - Nilfisk-Advance City Ranger 2250 Operator's Manual

General information

1.16 Cab heating

To switch on cab heating, turn the lever under the seat
until it is parallel with the seat edge. (Picture 1)
The cabin fan must also be activated.

1.17 Cab ventilation

Open the air damper behind the seat to ventilate the
cabin. Use the handle on the left side of the seat. Push
the handle away from the seat to open the air damper.
(Picture 2)

1.18 Air conditioning

Air conditioning can be used if the cabin is too warm and if
the windscreen and windows steam up in humid weather
conditions.
This applies also during the winter months.
To activate the air conditioning, the cabin fan must be
running at level 1 or 2.
It is recommended the air conditioning is serviced at least
once a year, to ensure it operates optimally.
NB
The condensate drain pipe must be checked/cleaned
at each service or at least once a year. Failure to do so
increases the risk of corrosion and bacterial accumulation
in the system which can cause discomfort/sickness for the
driver. Cabin filter must be checked/cleaned once a year.
26
1
Adjusting temperature
2
Air damper handle
Operator's Manual City Ranger 2250