Summary of Contents for Nilfisk-Advance City Ranger 2250
Page 1
’ peratOr s manual HEDGE TRIMMER City Ranger 2250...
Page 2
Introduction Dear Customer Congratulations with your new Nilfisk Outdoor product. The City Ranger 2250 is a Danish designed and manufactured product, which offers a very flexible way of maintaining outdoor areas. Optimal use of your City Ranger 2250 Hedge Trimmer: To ensure optimal performance of your City Ranger 2250 Hedge trimmer, please read this manual carefully before using the machine.
10°. The tyre pressure must be checked and adjusted to 1.5 bar (22 psi) when the Hedge Trimmer is attached. Lower tyre pressure increases the risk of roll-overs. (Picture 3) Operator’s Manual City Ranger 2250 Hedge Trimmer...
Hedge Trimmer Elkær Maskiner Model: HK 1300 MINI / 2250 Type: · has been manufactured in conformity with the provisions of the Machinery Directive 2006/42/EU Place: Lemvig Date: Signature: Knud Olsen, Senior Engineer Operator’s Manual City Ranger 2250 Hedge Trimmer...
Max. branch thickness 20 mm Operating speed 1-3 km/h Weight 130 kg Hydraulic oil Texaco Rando HDZ 46 or equivalent N.B: Specifications may be changed without prior notice. Information plate: (Picture 1) Information plate Operator’s Manual City Ranger 2250 Hedge Trimmer...
3. Raise the A-frame by pulling the joystick back until the Hedge trimmer is suspended, i.e. free of the ground. (Picture 4) 4. Stop the machine. Support strut lowered Locking Pull joystick back Operator’s Manual City Ranger 2250 Hedge Trimmer...
Follow the procedure for fitting in reverse order. To avoid Lock A-frame accidents when detaching the Hedge Trimmer, always make sure the machine is on a level and stable surface. Support strut up Operator’s Manual City Ranger 2250 Hedge Trimmer...
(Picture 1) How to unlock the transport lock: Unhitch the handle and lift the A-frame to the highest position. The attachment can now be lowered again. (Picture 2) Transport lock in unlocked position Operator’s Manual City Ranger 2250 Hedge Trimmer...
2,000. (Picture 2) 4. Move the joystick forward to lower the Hedge Trimmer and align the wheels with the surface. (Pictures 3 and +4) PTO front and throttle Joystick forward Wheels on surface Operator’s Manual City Ranger 2250 Hedge Trimmer...
Page 11
Activate the weight distribution (red button) if the surface is soft. Weight distribution is adjusted using the control knob. (Picture 1) N.B: Make sure no one is standing close to the machine when it is in use. Weight distribution Operator’s Manual City Ranger 2250 Hedge Trimmer...
4. To trim at lower horizontal/vertical positions: Press and hold the black button and move the joystick to the left. The arm moves down. Repeat positions as described in points 1 + 2. Cutting bar up Operator’s Manual City Ranger 2250 Hedge Trimmer...
Page 13
3. Press and hold the black button and move the joystick to the left. The arm now moves to the right. (Picture 4) Locking pin Arm to right Operator’s Manual City Ranger 2250 Hedge Trimmer...
Page 14
(Picture 1) Operating speed Depending on the conditions, an operating speed of 1–3 km/h is recommended. Operator’s Manual City Ranger 2250 Hedge Trimmer...
Defective blades must be replaced immediately. This ensures effective trimming and reduces wear and tear on the Hedge Trimmer. Blade replacement must only be carried out by an authorised Nilfisk Outdoor Division dealer Lubricating nipples Operator’s Manual City Ranger 2250 Hedge Trimmer...
Outdoor spare parts or attachments. · Machines with illegible serial numbers. · Damage caused by force majeure such as lightning, flood, fire, war, civil disturbance, etc. or other causes over which Nilfisk Outdoor Division has no control. Operator’s Manual City Ranger 2250 Hedge Trimmer...
2. Remove all plastic and rubber parts and dispose of. 3. After the parts mentioned have been removed, the machine is ready to be handed over to one of your local approved scrap merchants. Operator’s Manual City Ranger 2250 Hedge Trimmer...