Start/Stop Function For Salt And Sand Spreader (Extra Equipment) - Nilfisk-Advance City Ranger 2250 Operator's Manual

General information
1.10 Start/stop function for salt and sand
spreader (extra equipment)
The start/stop function ensures that the spreading stops
while the machine is stationary, so that the salt and sand
spreader only spreads when the machine is in motion.
The start/stop switch is located behind the left rear cover.
(Picture 1)
Move the on/off switch to 'ON' to activate it before starting
spreading. (Picture 2)
Remember to deactivate the on/off
!
switch when changing the salt and sand
spreader to another attachment.
20
1
Start /stop function - behind the left rear cover
2
Start/stop ON
Operator's Manual City Ranger 2250